At Zimmerman Plumbing and Heating, we regularly get the question, how much does it cost to install a ductless system. Let’s face it; we all want to know where our hard earned dollar is going. The problem is there are so many facets with the installation of ductless mini-splits that pinning down an exact cost is nearly impossible. However, we can break down what goes into a ductless system to give you a better overall understanding of the installation process and general idea of what the cost might be.
A ductless mini-split can be air conditioning only or a heat pump which provides both heating and cooling to a space. The system consists of an outdoor condenser and 1 or more indoor air handlers. These air handlers are all connected to the outdoor unit through copper refrigerant lines. The system can be controlled by a remote control thermostat, a traditional wall thermostat, or via Wi-Fi on a smart phone. Ductless systems can be designed to condition one room or an entire home. Sizing is determined by the heating and cooling demands on the space you are looking to condition. Single-zone ductless applications are fantastic to alleviate hot or cold spots in a home, like master bedroom suites, sun-rooms, bonus rooms, basements, and additions.
Floor mount indoor air handler have many great applications plus excellent performance
Most commonly used and known are the wall-mount air handlers that are hung near the ceiling. However, a mini-split air handler comes in a variety of options to deliver your conditioned air. Floor mounted units are available that would fill the space of a small radiator and ceiling cassettes are made to fit up into an attic space and almost flush with the ceiling. Traditional heat pump ducted air handlers are also available that can connect with a ductless air handler to utilize existing ductwork and provide conditioning to a room that is unable to be ducted. This is a great way to create zones in a home.
A single zone ductless system can range from around $3,000 to much higher depending on the application. This large variance of cost for a system has many factors to consider. For instance, how big or how small is the system, what type of air handler is being used, how many air handlers are being used, how difficult will the installation be, how long is the copper refrigerant lines, how close is the electric panel to the outdoor unit, do we need to use slim-duct to cover the exterior refrigerant lines, and finally what accessories are being used.
A multi-zone ductless system can consist of a huge variety of configurations to properly cool and heat an entire home. One outdoor unit can connect up to 8 indoor units!
First and foremost is the equipment, then we need the copper refrigerant lines to connect the indoor and outdoor units. The R-410 refrigerant that goes into the system, wiring to power the outdoor unit, the breaker in the electric panel, electric disconnect at the outdoor unit, wiring to the indoor unit, a pad and ‘legs’ for the outdoor unit to sit level on, condensate discharge lines, and of course the time it takes to complete the installation of the system.
Most commonly used indoor air handlers are these wall-mounted systems.
We have been specializing in ductless mini-split systems for years and are a Mitsubishi Diamond Elite Dealer as well as a Carrier Factory Authorized Dealer. Give us a call to learn more or schedule your free estimate to see how ductless can work for you.
Learn more about ductless heat pumps here.
Every year when we get our first hot day in Central Pennsylvania, countless air conditioning…
What to Do If Your House Floods Did you know that 90% of all formally declared…
What to Do When the Power Goes Out Your power can go out at any…
Why Is My Thermostat Blank? As a homeowner, a blank thermostat may appear ominous, especially…
How to Prevent Power Surges in Homes Electricity powers modern living, from how you wake…
Dry air in your home can be unpleasant, causing dry, itchy skin, respiratory discomfort and even…